Name: Xcite XBS100-4 100W RMS Ultra-Slim Bass Shaker
Brand: Xcite
SKU: XBS100-4
Price: 120.54 EUR
Availability: InStock

100W RMS ultra-slim bass shaker

Serious tactile power without a tall transducer body.

The Xcite XBS100-4 is a 4 Ohm tactile bass shaker for sim racing rigs that need strong, detailed feedback but cannot easily fit a bulky traditional transducer. Treat it as a 100W RMS haptic unit first: the 500W figure is peak/max headroom, while the useful setup target is clean 100W-class tactile control with proper amplifier headroom.

100W RMS 500W peak headroom 4 Ohm version 48.5 mm slim body

Xcite XBS100-4 100W RMS bass shaker - OCRacing

Xcite XBS100-4 compact terminals - OCRacing

Built for serious sim rig feedback

Feel stronger effects without turning every vibration into one big rumble.

The XBS100-4 is made for stronger tactile zones: seat base, backrest, pedal deck, chassis plate or a dedicated haptic platform. In a tuned SimHub setup it can separate road texture, kerbs, engine vibration, gear shifts, ABS pulses and impacts with more force than smaller compact shakers.

01Seat and cockpit impact

Use it where you want a stronger physical hit through the seat, frame or mounted plate.

02Low-frequency authority

11 Hz – 1 kHz operating range with a 22.1 Hz resonance point for deep tactile response.

03More than buzz

+/- 12 mm mechanical excursion helps create movement you can feel, not only surface vibration.

04Compact power

48.5 mm total height makes it easier to fit than many traditional high-output tactile units.

SpiderCore architecture

High-output tactile response in a 48.5 mm body.

The XBS100-4 uses a neodymium motor, oversized 4.5 inch dual voice coil, dual steel suspension and Xcite’s SpiderCore architecture. That combination keeps the unit slim while giving it the excursion, speed and mechanical strength needed for demanding haptic use.

100W RMS rating

The practical continuous figure for amplifier sizing and real-world tactile tuning.

+/- 12 mm Xmax

Large mechanical excursion for a compact, low-profile transducer.

324 N peak force

Strong force output, with 215 N average force specification.

IP66 aluminum housing

Robust construction with minimal-footprint terminals and a clean compact format.

Amplifier and tuning

Plan it as a 100W RMS shaker with serious peak headroom.

The XBS100-4 is a 4 Ohm tactile transducer and needs an amplifier that is stable at the final impedance of your wiring. For planning, work around the 100W RMS rating and use the 500W figure as peak/max headroom rather than a constant power target. It is not a good match for tiny low-power desktop amps if you want the unit to perform properly.

100W RMS target 4 Ohm load 500W peak/max 8.2 N/W sensitivity

Installation guidance

Give the shaker a solid mechanical path into the rig.

A powerful tactile transducer only works well when the vibration can travel into the structure. Mount the XBS100-4 to a rigid plate, seat frame, pedal deck or cockpit profile instead of soft padding. The stronger the mechanical coupling, the cleaner and more useful the feedback will feel.

1Choose the effect zone

Seat base, backrest, pedals or cockpit frame – decide where the strongest feedback should be felt.

2Use a rigid mount

Solid plates and aluminum profile transfer energy better than flexible brackets or soft surfaces.

3Check amplifier load

Plan wiring around the 4 Ohm load and make sure the amplifier is stable for the final setup.

4Tune with restraint

Strong shakers feel best when each effect has a purpose instead of sending everything at full gain.

Xcite XBS100-4 technical drawing and dimensions - OCRacing

Dimensions that matter

156 mm diameter, only 48.5 mm tall.

The XBS100-4 is much more serious than the smaller XBS25, but still keeps a low-profile body. That makes it useful for tight cockpit positions where you want higher tactile output without creating a tall stack under the seat or pedal area.

156 mm diameter 48.5 mm height 1570 g

What’s included

The transducer itself, ready for your own haptic system.

This product includes one Xcite XBS100-4 tactile transducer. Amplifier, wiring, audio output, mounting hardware and mounting plates are selected separately based on your rig and the number of tactile channels you want to run.

Xcite XBS100-4 rear mounting face - OCRacing

Is this stronger than XBS25?

Yes. The XBS100-4 is the higher-output model with 100W RMS rating, larger body, more excursion and much higher force capability.

Can it be used with SimHub?

Yes. With a suitable amplifier and audio output, it can be used for SimHub tactile effects such as road texture, kerbs, gear shifts, engine vibration, ABS and impacts.

Technical overview

Xcite XBS100-4 specifications.

Product	Xcite XBS100-4 100W RMS Bass Shaker
Article number	XBS100-4
EAN	9505384588973
Type	Bass shaker / tactile transducer
Nominal format	4 Ohm version
DC resistance	3.89 Ohm
RMS power / noise test	100 W
Peak / max headroom	500 W
Frequency range	11 Hz – 1 kHz
Resonant frequency	22.1 Hz
Mechanical Xmax	+/- 12.0 mm
Peak force	324 N peak / 215 N average
Force sensitivity	8.2 N/W
BL product	14.6 N/A
Motor	Neodymium motor with oversized dual voice coil
Voice coil diameter	114 mm
Voice coil layers	4
Housing	Aluminum housing, IP66-rated
Outer diameter	156 mm
Total height	48.5 mm
Product weight	1570 g
Included	1x Xcite XBS100-4 tactile transducer
Not included	Amplifier, wiring, mounting hardware, mounting plates and audio output

Serious tactile power without a tall transducer body.

Feel stronger effects without turning every vibration into one big rumble.

High-output tactile response in a 48.5 mm body.

Plan it as a 100W RMS shaker with serious peak headroom.

Give the shaker a solid mechanical path into the rig.

156 mm diameter, only 48.5 mm tall.

The transducer itself, ready for your own haptic system.

Is this stronger than XBS25?

Can it be used with SimHub?

Xcite XBS100-4 specifications.

Related products

Dayton Audio BST-1 Universal Mount for simracing rig

Dayton Audio BST-1 50W High Power Pro Tactile Bass Shaker

PremiumCord HQ 3.5mm Stereo Jack Extension Cable (3m)

Dayton TT25 mount

Fanatec CSL Pedals Dayton TT25 mount

Information

Account

Information

Terms & Policies